| Customization: | Available |
|---|---|
| Packaging: | Soft Tube Sealing |
| Automatic Grade: | Manual |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. tube sealer machine to replace the traditional welding or bonding process, low cost, clean pollution-free and does
not damage the plastic tube.
2. cosmetic tube sealer is equipped with Airtac cylinders and Airtac magnetic valves, stable performance.
3. plastic tube sealer Intelligent automatic frequency tracking system, which can recognize the vibration frequency of
the ultrasonic system automatically, so as to effectively protect the mold. Large output, small noise, stable performance,
long life
4. tube sealer high welding strength, Good sealing performance, the strength of welding area is same as other area of the plastic
5.Precision IC control circuit, automatic overload protection system.
6. semi automatic tube sealer Adopting PLC controller, easy to operate, auto-protecting system can avoid the damage caused by improper operation.
7. Four points balance adjustment, tube sealer sealing machine manual easy to adjust the welding head.
8.manual toothpaste tube sealer Aluminum/titanium radial pole, sonic, strong stability.
9. The cone to press the tube on the orientation position, can assure tube is round.
10, Manual semi automatic ultrasonic sealing toothpaste plastic cosmetic tube sealer machine Can adjust filling volume easily.
11. Sealing and cutting are on different positions, can avoid burrs.
13. Install cold water circulation in back mold, which can assure sealing quality under high output status.
14. semi automatic cosmetic tube sealer ultrasonic stepper motor is used for orientation, the speed can be adjusted to improve the accuracy.
15.semi automatic ultrasonic toothpaste plastic cosmetic tube sealer machine stable welding process, easy operation, easy maintenance.
16. Auto Orientate, Sealing, Print code, Cutting.
| Ultrasonic Power | 2000 W |
| Frequency | 20 KHz |
| Power Supply | AC 110/220V, 50/60Hz |
| Delay Time | 0.01-2.99 S |
| WeldTime | 0.01-2.99 S |
| Hold Time | 0.01-2.99 S |
| Driven Mode | Pneumatic |
| Stroke | 75 MM |
| Working Pressure | 0.5-0.7 MPa |
| Tube Diameter Range | 10-50 MM |
| Tube Height Range | 50-250MM |
| Filling Range | A: 5-60 ml B: 10-120 ml C: 25-250 ml D: 50-500 ml |
| Capacity | around 10-15 tubes/min |
| Packing Dimension | L*W*H 940*700*750MM=0.7CBM |
| Gross Weight | 80KGS |
| HS code | 8422303090 |
){kind=link}