| Customization: | Available |
|---|---|
| Packaging: | Soft Tube |
| Automatic Grade: | Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Double ultrasonic head food grade fully automatic pnuematic laminated plastic cosmetic tube filler and sealer to replace the traditional welding or bonding process, low cost, clean pollution-free and does not damage the plastic tube.
2.tube filler and sealer is equipped with Airtac cylinders and Airtac magnetic valves, stable performance.
3.cosmetics tube filler and sealer automatic frequency tracking system, which can recognize the vibration frequency of
the ultrasonic system automatically, so as to effectively protect the mold. Large output, small noise, stable performance,
long life.
4.plastic tube filler and sealer High welding strength, Good sealing performance, the strength of welding area is same as other area of the plastic.
5. Precision IC control circuit, automatic overload protection system.
6.laminated tube filler and sealer adopting PLC controller, easy to operate,autoprotecting system can avoid the damage caused by improper operation.
7.tube filler and sealer food grade four points balance adjustment, easy to adjust the welding head.
8. Aluminum/titanium radial pole, sonic, strong stability.
9. The cone to press the tube on the orientation position, can assure tube is round.
10.aluminum tube filler and sealer pneumatic can adjust filling volume easily.
11.Fully automatic tube filler and sealer sealing and cutting are on different positions, can avoid burrs.
12. tube filling sealing machine Install cold water circulation in back mold, which can assure sealing quality under high output status.
13.plastic cosmetic tube filler and sealer stepper motor is used for orientation, the speed can be adjusted to improve the accuracy.
14. Stable welding process, easy operation, easy maintenance.
15. Auto Orientate, Sealing, Print code, Cutting.
tube filler and sealer
cosmetics tube filler and sealer
plastic tube filler and sealer
| Ultrasonic Power | 2000 W/head |
| Frequency | 20 KHz |
| Power Supply | AC 110/220V, 50/60Hz |
| Delay Time | 0.01-2.99 S |
| WeldTime | 0.01-2.99 S |
| Hold Time | 0.01-2.99 S |
| Driven Mode | Pneumatic |
| Stroke | 75 MM |
| Working Pressure | 0.5-0.7 MPa |
| Tube Diameter Range | 10-50 MM |
| Tube Height Range | 50-200 MM |
| Filling Range | A: 5-60 ml B: 10-120 ml C: 25-250 ml D: 50-500 ml |
| Hopper capacity | 30L*2 |
| Capacity | around 35-45tubes/min |
| Packing Dimension | 3500*1900*2100mm |
| Gross Weight | 900KGS |
| HS code | 8422303090 |
){kind=link}