Full Automatic Water Juice Plastic Round Bottle Liquid Filling Capping Labeling Machinery

• Customization: Available
• Type: Volumetric Filling Machine
• Automatic Grade: Automatic
• Model NO.: TFAL-08
• Material Type: Liquid
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Multi-Room Feeding
• Dosing Device: Capacity Cup
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Chute Pneumatic Combination Lifting
• Structure: Linear
• Packaging: Bottle
• Packaging Material: Plastic
• Transport Package: Wood Case
• Specification: 375*78*104.5CM
• Trademark: TOPCN
• Origin: Guangzhou
• HS Code: 8422301090
• Production Capacity: 100PCS/Month

Product Description

Full Automatic Water Juice Plastic Round Bottle Liquid Filling Capping Labeling Machinery is very efficient with high cost performance. It is widely used in medicine, daily chemical and other industries such as essential oils, perfumes, juice liquid etc. Machine with magnetic pump is good choice for low viscous corr, a little foamy liquid 316 stainless steel pump can use for very high temperature liquid fill.
Application

It is suitable for various corrosive, low viscosity and non-particulate liquids, such as:various chemicals (medicine oil, medicinal liquor, alcohol, eye drops, syrup), chemicals(solvent, acetone), oil (edible oil, essential oil ), cosmetics (toner, makeup remover, spray), food (100 degree high temperature, such as milk, soy milk), beverage (juice, fruit wine), seasoning (soy sauce vinegar) and other non-particulate liquid; high and low foam liquid ( Care solution, detergent)

Filling Machine
Pump	Magnetic pump, diaphragm pump, peristaltic pump
Voltage	AC110V/220V 50Hz-60Hz
Power	60W (Each Pump)
Recommended filling volume	110V 10-500ml/ 220V 10-1000ml
Maximum Flow	2500m/min for each nozzle (based on water)
Filling Nozzles	4 (we can customize the nozzles based on your demands)
Working Speed	30-50 bottles/min(based on bottles and liquids)
Air Pressure	0.3-0.4mpa
Filling Accuracy	1% (for water)
Dimension Of Filling Nozzle	standard 8mm and 6mm
Delay Range	0.01s-999.9s
Belt Length	1.0m
Size Of Air Compressor Connector	OD8mm
Bottle Height	<220mm (Can be customized, max height 300mm)

 Filling machine with three kinds of pump, pls help to advise your liquid and bottle volume before order.

Capping Machine
Bottle height	30-300mm
Cap Diameter	18-80mm
Bottle Height	40-300mm
Bottle Diameter	20-180mm
Working speed	20-60 bottles / minute (depending on bottle and cap size and shape)
Working voltage	AC220V/110V 50- 60HZ
Working pressure	0.4-0.6MPa
Dimension	113x635x104.5mm
Packing size	1190*650*650mm
Weight	120KG
Note	If your caps is used by pressing instead of screwing, please contact us and we will send the suitable machine for you.

Labeling Machine
Model type	Model	TPLM-R2
Main Technical Parameters	Accuracy	+-1mm
	Speed	20 - 200pcs per minute
	Available Bottle OD	20 - 120mm
	Label Width	15 - 200mm
	Label Length	25 - 300mm
	Label Roll ID	76mm
	Max. OD of Label Roll	250mm
	Voltage	AC220/110V 50/60Hz
	Power	1500W
Machine size	Dimension	1270x80x78cm

FAQ:
Q1: Are you a machine manufacturer or trading company?
A1: We are a reliable machine manufacturer that could gives u best service. And our machine can be customized by client's requirement. Welcome to visit our factory!

Q2: How do you guarantee this machine normally operating? A
2: Every machine is tested by our factory and other client before shipping, We will adjust the machine to optimal effect before delivery. And spare is always available and free for you in warranty year.

Q3: How can I install this machine when it arrives?
A3: We will send the engineers overseas to help client installing, commissioning and training.

Q4: Could I choose the language on touch screen?
A4: It's no problem. You can choose Spanish, French, Italian, Arabic, Korean, etc,.

Q5: What should I do to choose the best machine for us?
A5: 1) Tell me the material you want to fill, we'll choose the suitable type of machine for you to consider. 2) After choose the suitable type of machine, then tell me the filling capacity you need for the machine. 3) At last tell me the inner diameter of your container to help us choose the best diameter of the filling head for you.

Q6: Do you have manual or operation video for us to know more about the machine?
A6: Yes, we will send you the manual and operation video after you ask for us.

Q7: If there's some spare parts that broke, how to solve the problem?
A7: Yes, we will send you the manual and operation video after you ask for us.

Q8: If there's some spare parts that broke, how to solve the problem?
A8: First of all, please take the pic or make a video to show the problem parts. After the problem is confirm from our sides, we'll send you the spare parts for free, but the shipping cost should be paid by your side.

Q9: Do you have manual or operation video for us to know more about the machine?
A9: Yes, we will send you the manual and operation video after you ask for us.

Q10: If there's some spare parts that broke, how to solve the problem?
A10: Yes, we will send you the manual and operation video after you ask for us.

Q11: If there's some spare parts that broke, how to solve the problem?

A11: First of all, please take the pic or make a video to show the problem parts. After the problem is confirm from our sides, we'll send you the spare parts for free, but the shipping cost should be paid by your side.