| Customization: | Available |
|---|---|
| Packaging: | Soft Tube |
| Automatic Grade: | Semi-Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. semi automatic tube filling sealing machine to replace the traditional welding or bonding process, low cost, clean pollution-free and does not damage the plastic tube.
2. cream tube sealing machinery is equipped with Airtac cylinders and Airtac magnetic valves, stable performance.
3. pe tube sealing machine Intelligent automatic frequency tracking system, which can recognize the vibration frequency of
the ultrasonic system automatically, so as to effectively protect the mold. Large output, small noise, stable performance,
long life.
4. heating sealing tube machine High welding strength, Good sealing performance, the strength of welding area is same as other area of the plastic.
5. Precision IC control circuit, automatic overload protection system.
6. hot air tube sealing machine adopting PLC controller, easy to operate,autoprotecting system can avoid the damage caused by improper operation.
7. Four points balance adjustment, easy to adjust the welding head.
8. Aluminum/titanium radial pole, sonic, strong stability.
9. The cone to press the tube on the orientation position, can assure tube is round.
10, Hot sell pharma mixing ultrasonic heating PE cream semi automatic tube filling sealing machine can adjust filling volume easily.
11. pharma tube filling machine sealing and cutting are on different positions, can avoid burrs.
12. Install cold water circulation in back mold, which can assure sealing quality under high output status.
13. Stepper motor is used for orientation, the speed can be adjusted to improve the accuracy.
14. Stable welding process, easy operation, easy maintenance.
15. Auto Orientate, Sealing, Print code, Cutting.
| Ultrasonic Power | 2000 W |
| Frequency | 20 KHz |
| Power Supply | AC 110/220V, 50/60Hz |
| Delay Time | 0.01-2.99 S |
| WeldTime | 0.01-2.99 S |
| Hold Time | 0.01-2.99 S |
| Driven Mode | Pneumatic |
| Stroke | 75 MM |
| Working Pressure | 0.5-0.7 MPa |
| Tube Diameter Range | 10-50 MM |
| Tube Height Range | 50-200 MM |
| Filling Range | A: 5-60 ml B: 10-120 ml C: 25-250 ml D: 50-500 ml |
| Heating power | 800W*2 |
| Mixing motor power | 200W |
| Hopper capacity | 30L |
| Capacity | around 10 tubes/min |
| Packing Dimension | L*W*H 1110*840*1510MM=1.4CBM |
| Gross Weight | 260KGS |
| HS code | 8422303090 |
){kind=link}